
|
About Pure Waterworks. |
|
PURE WATERWORKS WATER TREATMENT SYSTEM
THE POINT OF ENTRY WATER PURIFICATION SYSTEM THAT PROVIDES PURE WATER AT EVERY TAP THROUGHOUT YOUR SYSTEM.
The Pure Waterworks system uses Hydrogen Peroxide as an oxidizer to remove unwanted substances from your water such as rust, sulfur smell, and bacteria. Hydrogen Peroxide is a compound that increases the oxygen content of your water. As we all know, water is H2O and Hydrogen Peroxide is H2O2, when comparing these two compounds you will notice that the only difference is that hydrogen peroxide is adding 1 extra atom of oxygen to your water, thus resulting in oxidation of harmful substances in a natural way. Dr. Joseph M. Price demonstrated over twenty years ago the undeniable connection between the practice of chlorinating water supplies, and arteriosclerosis, in which a plaque composed mainly of cholesterol builds up inside arteries, resulting eventually in heart attacks and strokes. Please keep this in mind and then remember that the main element that the body is primarily composed of is oxygen. A healthy body is around four-fifths water: water is eight-ninths oxygen, which is also present in most of the other organic compounds. The body is over two-thirds oxygen, more than twice as much as all the other elements combined. Through oxidation, the body generates heat and energy from whatever fuel it consumes, and disposes of its toxins and any unwelcome microbes. The way our system works is very simple. First a flow switch is installed which is activated every time there is a water demand and that triggers the injection pump to inject the hydrogen peroxide into the water at a monitored rate and can be adjusted by a turn of a numbered dial on the pump. Once the peroxide is injected, the water runs through a back flush tank that contains natural media to remove the larger particles. The final stage is our polishing filter which is 5 micron fine to remove minute particles. Once your water is run through our system the result in water as clean, healthy and pure as from a clear mountain spring.
Hydrogen Peroxide Injection Pump
We have a peristaltic (squeeze) pump available to economically inject the hydrogen peroxide into the water system. The pump is turned on and off by either a pressure switch or a flow switch. The pump can be adjusted to inject from 10 to 100 PPM. A maintenance level of 25-50 PPM is recommended.
We sell 35% hydrogen peroxide in 5 gal, and 15 gal containers and 50 gal drums. It can be used to treat swimming pools, hot tubs, and water systems. We also have the water treatment systems for homes and barns. We will ship hydrogen peroxide nationwide in amounts of 5 gallons and larger. Our pricing is very competitive. CLICK HERE FOR PRICING |